The Stony Shore Pullover Crochet Pattern

Worsted Weight (4) Yarn, Lion Brand Jeans in “Topstitch”, 6(6, 6, 7, 7, 8, 8, 8, 9) Skeins or 1300(1370, 1460, 1550, 1640, 1730, 1820, 1910, 2000) Yards
H/5.00mm Crochet Hook
Yarn Needle
Scissors
Stitch Markers (4)
Measuring Tape

This pattern is worked from the bottom up in separate panels.
The numbers in parenthesis at the beginning of the rows are your row count for all sizes.
The numbers in parenthesis at the end of the rows are your stitch counts for all sizes.
The numbers in parenthesis within the rows are your instructions for all sizes.
The Ch 3 at the beginning of the row counts as 1 Dc stitch.
You can make your pullover longer or shorter by adding/removing rows on both panels (before the neckline split on the front panel) in multiples of 2. Take into account the yarn requirement change.

The Stony Shore Pullover Crochet Pattern

The Stony Shore Pullover Crochet Pattern

I used Lionbrand Jeans for the pullover instead of Heartland like I did in the cardigan. However, either one works great for this! So if you prefer Heartland you can still swap it out. Although, I’m in love with Jeans yarn and highly recommend it!

Description: The Stony Shore Pullover is the sister design to the Stony Shore Cardigan! It has a cozy oversized fit with cute balloon style sleeves. The stitch gives a beautiful and fun texture. Beginner friendly and fun to make!

Links:

The Stony Shore Pullover is available as a kit with Lionbrand! You can get all the yarn you need to make your own pullover + the PDF digital download of the pattern! You can even customize your yarn color.

Check out the full video tutorial for The Stony Shore Pullover crochet pattern on my YouTube Channel! Be sure to subscribe while you are there so I can bring more free content!

You can get low cost ad-free printable PDF for The Stony Shore Pullover in my Ravelry store. Save the pattern to your queue for later!

Or grab the PDF from my Etsy shop!

Materials:

Worsted Weight (4) Yarn, Lion Brand Jeans in “Topstitch”, 6(6, 6, 7, 7, 8, 8, 8, 9) Skeins or 1300(1370, 1460, 1550, 1640, 1730, 1820, 1910, 2000) Yards

H/5.00mm Crochet Hook

Yarn Needle

Scissors

Stitch Markers (4)

Measuring Tape

Gauge:

4X4”= 13 Dc by 7 Rows

Sizes:

XS(S, M, L, XL, 2X, 3X, 4X, 5X)

Finished Measurements:

Notes:

This pattern is worked from the bottom up in separate panels.

The numbers in parenthesis at the beginning of the rows are your row count for all sizes.

The numbers in parenthesis at the end of the rows are your stitch counts for all sizes.

The numbers in parenthesis within the rows are your instructions for all sizes.

The Ch 3 at the beginning of the row counts as 1 Dc stitch.

You can make your pullover longer or shorter by adding/removing rows on both panels (before the neckline split on the front panel) in multiples of 2. Take into account the yarn requirement change.

Video Link:

Full Video Tutorial

Stitches and Abbreviations (US Terms):

Ch- Chain

Fsc- Foundation Single Crochet

Sc- Single Crochet

BLO- Back Loop Only

Fdc- Foundation Double Crochet

Dc- Double Crochet

YO- Yarn Over

St(s)- Stitch(es)

Bead St- 1 Dc in next, **YO, insert hook from front to back around the post of the most recent Dc, YO, pull up loop** repeat from ** to ** 2 more times (7 loops on hook), YO, pull through first 6 loops, YO pull through final 2 loops, Sk next St.

RS- Right Side

WS- Wrong Side

Pattern:

Back Panel-

Row 1: 10 Fsc, turn. (10 Sc) (Note- alternatively, you can Ch 11, work 1 Sc in second Ch from hook and across for 10 Sc.)

Rows 2-68(74, 78, 84, 90, 94, 100, 106, 112): Ch 1, 1 Sc (BLO) in each St across, turn.

Do not turn after your last row. We will now be working Row 1 of the main body of the panel into the ends of the ribbing rows.

Row 1 (WS): 1 Sc into the end of each row across, turn. (68(74, 78, 84, 90, 94, 100, 106, 112) Sc)

Row 3: Ch 3, 1 Dc in each St across, turn. (68(74, 78, 84, 90, 94, 100, 106, 112) Dc)

Rows 4-35(35, 35, 37, 37, 39, 39, 41, 41): Repeat Rows 2 & 3.

Tie off. You can make your pullover longer by adding or taking away rows in multiples of two before tying off. Be sure to take into account you will need extra yarn than listed above. Be sure to add or remove the same amount of rows on the front panel.

Front Panel:

Repeat Rows 1-68(74, 78, 84, 90, 94, 100, 106, 112) of the back panel ribbing and Rows 1-30(30, 30, 32, 32, 34, 34, 36, 36) of the main body of the back panel.

You will now be splitting the neckline-

Row 31(31, 31, 33, 33, 35, 35, 37, 37): Ch 3, 1 Dc in next 25(27, 29, 31, 35, 37, 39, 43, 45) Sts, turn. (26(28, 30, 32, 36, 38, 40, 44, 46) Dc)

Row 32(32, 32, 34, 34, 36, 36, 38, 38): Repeat Row 2. (12(13, 14, 15, 17, 18, 19, 21, 22) beads)

Row 33(33, 33, 35, 35, 37, 37, 39, 39): Ch 3, 1 Dc in next 20(22, 24, 26, 30, 32, 34, 38, 40) Sts until 5 Sts remain Dc2tog twice, 1 Dc in last (the top of the Ch 3), turn. (24(26, 28, 30, 34, 36, 38, 42, 44) Dc)

Row 34(34, 34, 36, 36, 38, 38, 40, 40): Repeat Row 2. (11(12, 13, 14, 16, 17, 18, 20, 21) beads)

Row 35(35, 35, 37, 37, 39, 39, 41, 41): Ch 3, 1 Dc in each St across until 3 Sts remain, Dc2tog, 1 Dc in last, turn. (23(25, 27, 29, 33, 35, 37, 41, 43) Dc)

Tie off, leaving a long tail to sew last row to back panel.

Opposite Shoulder-

Count 26(28, 30, 32, 36, 38, 40, 44, 46) Sts in towards center of shirt at row 30(30, 30, 32, 32, 34, 34, 36, 36)and join with a Sl St.

Row 31(31, 31, 33, 33, 35, 35, 37, 37): Ch 3, 1 Dc in next 25(27, 29, 31, 35, 37, 39, 43, 45) Sts, turn. (26(28, 30, 32, 36, 38, 40, 44, 46) Dc)

Row 32(32, 32, 34, 34, 36, 36, 38, 38): Repeat Row 2. (12(13, 14, 15, 17, 18, 19, 21, 22) beads)

Row 33(33, 33, 35, 35, 37, 37, 39, 39): Ch 3, Dc2tog twice, 1 Dc in each remaining St to end, turn. (24(26, 28, 30, 34, 36, 38, 42, 44) Dc)

Row 34(34, 34, 36, 36, 38, 38, 40, 40): Repeat Row 2. (11(12, 13, 14, 16, 17, 18, 20, 21) beads)

Row 35(35, 35, 37, 37, 39, 39, 41, 41): Ch 3, Dc2tog, 1 Dc in each St to end of row, turn. (23(25, 27, 29, 33, 35, 37, 41, 43) Dc)

Tie off, leaving a long tail to sew last row to back panel.

Sleeves (make 2)-

Row 1: 10 Fsc, turn. (10 Sc)

Rows 2-27(28, 28, 29, 30, 31, 32, 33, 34): Ch 1, 1 Sc (BLO) in each St across, turn.

Do not turn after your last row. We will now be working Row 1 of the main body of the panel into the ends of the ribbing rows.

Row 1: Work 2 Sc into the end of each row across, turn. 54(56, 56, 58, 60, 62, 64, 66, 68 Sc) (Note- your sleeve is going to look wavy and crazy for the first several rows! Don’t worry, it’s supposed to!)

Row 3: Ch 3, 1 Dc in each St across, turn. (54(56, 56, 58, 60, 62, 64, 66, 68) Dc)

Rows 4-21(21, 21, 21, 21, 19, 19, 19, 19): Repeat Rows 2 & 3.

Join Panels-

Place your front and back panels together RS facing.

Using your preferred seaming method attach the front panel to the back panel at the shoulders (I used my hook and slip stitched across). Be sure your panels are aligned and that you aren’t bunching or skipping stitches.

Finally, fold your pullover so that the back and front panels are on top of each other, RS facing. Seam from the cuffs to the underarm and down the side of the cardigan.

Neckline Trim-

With your pullover RS out, join yarn with a Sl St at any St on the neckline ( I like to join just before a shoulder seam).

Bead St- 1 Dc in next, YO, insert hook from front to back around the post of the most recent Dc, YO, pull up loop repeat from to 2 more times (7 loops on hook), YO, pull through first 6 loops, YO pull through final 2 loops, Sk next St.